top of page

ITI Tools

Our company is the leading ITI Tools supplier for all the Trades of ITI like Fitter, Electrician, Welder, COPA, Wireman, Diesel Mechanics, Plumber, Electronics, etc. as per NCVT DGET and SCVT norms. Apart from this, our trained service engineers go to the customer's place and also provide equipment installation and training. Our company facilitates the annual maintenance cost of the goods once the goods are guaranteed. Calibration of all instruments is also available here. Our company facilitates the annual maintenance cost of the goods once the goods are guaranteed. Calibration of all instruments is also available here.

​

ITI Training Tools | ITI Tools price list | ITI Tools suppliers | ITI Tools suppliers in India | ITI Tools suppliers in Delhi | ITI Tools suppliers in Jharkhand | ITI Tools suppliers in Bihar |  All Geared Lathe Machine | Hydraulic Trainer Kit | Pneumatic Trainer Kit | Motors | Electrician Motor-Panel Set | Drilling Machine | Bench Vice | 1-18 Tools | Grinding Machine | Screw Driver | Hammer | Files | Taparia Hand Tools

 

ELECTRICIAN | FITTER | PLUMBER | DEISEL MECHANIC | WELDER | WIREMEN |

ITI Tools

ITI Fitter Tools

ITI Fitter Tools

List of Tools

  • Steel Rule with metric & British graduation

  • Try Square.

  • Caliper inside spring type.

  • Caliper hermaphrodite spring type

  • Caliper outside spring type

  • Divider spring type

  • Scriber

  • Centre Punch

  • Screwdriver

  • Chisel cold flat

  • Hammer ball-peen With handle

  • Hammer ball-peen With handle.

  • File flat ) second cut

  • File flat smooth

  • File half round second cut

  • Hacksaw frame fixed type

  • Safety goggles.

  • Dot punch

INSTRUMENT AND GENERAL SHOP OUTFIT - FOR 2 (1+1) UNITS NO ADDITIONAL ITEMS ARE REQUIRED 

  • Steel Rule Graduated both in Metric and

  • English Unit

  • Straight edge steel

  • Spirit Level metal Type ) 2

  • Stud Extractor EZY ) out

  • Combination Set

  • Micrometer outside.

  • Micrometer outside.

  • Micrometer outside.

  • Micrometer inside with extension rods.

  • Vernier caliper

  • Vernier height gauges

  • Vernier bevel protractor Blade with Acute

  • Angle Attachment

  • Screw pitch gauge Metric

  • Wire gauge, metric standard

GENERAL SHOP OUTFIT

  • Surface plate C.I/Granite with Stand and

  • Cover

  • Marking table (Mild steel)

  • Universal scribing block.

  • V)Block pair with clamps

  • Angle plate

  • Punch letter set.

  • Punch number set.

  • Portable hand drill (Electric)

  • Drill twist straight shank

  • Drill twist Taper shank

  • Taps and dies complete set inbox.

  • Taps and dies complete set

  • File knife edge smooth

  • File feather edge smooth

  • File triangular smooth

  • File round second cut

  • File square second cut

  • Feeler gauge

  • File triangular second cut.

  • File flat second cut safe edge.

  • File flat bastard

  • File flat bastard.

  • File Swiss-type needle

  • File half round second cut.

  • File half-round bastard.

  • File round bastard.

  • File hand second cut.

  • File card.

  • Oil Can

  • Pliers combination insulated

  • Wooden handle forged Soldering Iron

  • copper bit.

  • Blow Lamp

  • Spanner) Double Ended

  • Spanner adjustable

  • Interchangeable ratchet socket set

  • Double Ended tubular Box spanner set with Tommy bar.

  • Glass magnifying

  • Clamp toolmaker

  • Clamp "C"

  • Clamp "C"

  • Hand Reamer set (Tapar pin-straight flute)

  • Machine Reamer parallel (Helical flute)

  • Scraper flat

  • Scraper triangular

  • Scraper half-round

  • Chisel cold cross-cut & diamond point.

  • Chisel cold flat

  • Chisel cold round nose.

  • Drill chuck with key

  • Pipe wrench

  • Pipe vice

  • Adjustable pipe die set BSP

  • Wheel dresser (One for " units) Star/Dresser with Holder

  • Machine vice ) Swivel Base100mm

  • Machine vice ) Swivel Base 125mm

  • Sleeve drill Morse

  • Vice bench

  • Bench working.

  • Almirah.

  • Lockers with & drawers (standard size).

  • Metal rack

  • Instructor Table

  • Instructor Chair

  • Blackboard with easel.

  • Fire extinguisher (For " Units)

  • Fire buckets.

  • Machine vice.

  • Wing compass.

  • Hand hammer with handle.

  • Torque wrench (Standard/Ratchet type)

  • Power tools for fastening

  • Different Profile gauges (Plate type) ) For

  • demonstration

  • Knurling tool (Diamond, straight &

  • Diagonal)

  • Indexable boring bar with inserts

  • Machine maintenance manual for Lathe,

  • Pedestal Grinder, Drill Machine, Power saw

  • Temperature gauge

  • Dowel pin ( straight)

  • Standard Tap screws

  • Lapping plate

  • Medium carbon Heat treated alloy steel Metric Studs and bolts along with nuts (for display) of standard length (Maybe
    manufactured in)house)

  • Caps screws

  • Drill gauges

  • Cast Iron Globe Valve (Flanged type)

  • C.I. Sluice / Gate valve (flanged type)

  • Stop cock

  • M.S. Pipe

  • G.I. Pipe

  • Slip)on Forged steel Flange

  • Bolt & Nut with washer (Maybe manufactured in)house)

  • Pipe threading die with handle

  • Jigs & Fixture (sample))For demonstration (Maybe manufactured in)house)

  • M. S. Shaft (May be manufactured in)house)

​

  • Pulleys (for V)belt or Flat belt)

  • Steel keys (May be manufactured in house)

  • Damaged old spur gear

  • V belt and flat belt

  • Packing gasket

  • Washer, clutch, keys, jib, cotter & circlip

  • Hollow punch

  • Drill Drift (May be manufactured in)house)

  • Bearing different types

  • Lifting sling

  • Bearing extractor

  • Pulley extractor

TOOLS FOR ALLIED TRADE - SHEET METAL WORKER 

  • Trammel

  • Pocker.

  • Prick punch

  • Mallet.

  • Aviation Snips Straight Cut

  • Flat-headed hammers with handle.

  • Planishing hammer.

  • Snip bent Left Cut

  • Stake hatchet with Leg.

  • Stake grooving.

MODIFIED LIST OF TOOLS FOR THE 3RD AND 4TH SEMESTER FOR FITTER TRADE 

  • Slip Gauge as Johnson metric set.

  • Gauge snap Go and Not Go

  • Gauge plug

  • Gauge telescopic set.

  • Dial test indicator on stand

  • Sine bar

  • Dial vernier caliper. (Universal type)

  • Screw thread micrometer with

  • interchangeable. Pitch anvils for checking metric threads 60.

  • Depth micrometer. 0)25 mm

  • Vernier caliper.

  • Digital Micrometer outside.

  • Comparators Gauge ) Dial Indication with

  • Stand and Bracket.

  • Engineer's try square (knife)edge)

  • Surface roughness comparison plates

  • Digital Vernier caliper

  • Vernier Bevel protector

GENERAL SHOP OUTFIT 

  • Carbide Wear Block.

  • Lathe tools H.S.S. tipped set.

  • Lathe tools bit.

  • Lathe tools bit.

  • Lathe tools bit.

  • Arm strong type tool bit holder.

  • Arm strong type tool bit holder.

  • Arm strong type tool bit holder.

  • Stillson wrenches

  • Pipe cutter wheel type.

  • Pipe bender machine spool type with stand manually operated.

  • Adjustable pipe chain tongue to take pipes

  • Adjustable spanner.

GENERAL MACHINERY INSTALLATION

  • SS and SC center lathe (all geared) with the minimum specification 

  • Pillar Type Drilling machine

  • Drilling machine bench

  • D.E. pedestal Grinding machine with wheels rough and   smooth

LIST OF ADDITIONAL TOOLS FOR ALLIED TRADE-IN WELDING 

  • Continuous welding current, with all accessories and electrode holder 60% Duty Cycle with transformer welding set

  • Standard Accessories

  • Welder cable

  • Lugs for cable

  • Earth clamps.

  • Arc welding table (all metal top) with positioner.

  • Oxyacetylene gas welding set equipment with hoses, Oxygen & Acetylene cylinders,

  • regulator and other accessories.

  • Gas welding table with positioner with Fire Bricks

  • Welding torch tips of different sizes for Oxy acetylene gas welding

  • Gaslighter.

  • Trolley for gas cylinders.

  • Chipping hammer.

  • Gloves (Leather)

  • Leather apron.

  • Spindle key for cylinder valve.

  • Welding torches.

  • Welding goggles

  • Welding helmet with colored flame retardent glass

  • Tip cleaner

LIST OF TOOLS & ACCESSORIES FOR PNEUMATIC AND HYDRAULICS

  • Compressor unit

  • Pneumatic Trainer Kit, each consisting of the following matching components and accessories:

  1. Single-acting cylinder

  2. Double-acting cylinder

  3. 3/2 way valve

  4. 3/2 way valve

  5. One way flow control valve

  6. 5/2 way valve

  7. 5/2 way valve

  8. 5/2 way pneumatic actuated valve

  9. 3/2w ay roller lever valve

  10. Shuttle valve (OR)

  11. TWO PRESSURE VALVE

  12. PRESSURE GAUGE

  13. MANIFOLD WITH SELF CLOSING 

  14. PUSHBUTTON STATION FOR ELECTRICAL SIGNAL

  15. RELAY STATION 

  16. 3/2 WAY SOLENOID VALVE

  17. 5/2 WAY SINGLE SOLENOID VALVE

  18. 5/2 WAY DOUBLE SOLENOID VALVE

  19. POWER SUPPLY UNIT 

  20. PROFILE PLATE ANODISED ALUMINIUM

  • PNEUMATIC WORK STATION WITH 40 SQUARE MM ALUMINIUM PROFILE LEGAL WOODE WORKSURFACE AND ONE PEDESTAL DRAWER UNIT HAVING 5 DRAWER EACH

  • CARRIER FOR MOUNTING COMPONENTS SUCH AS PB & RELAY BOXES

  • CUT SECTION MODEL FOR PNEUMATIC COMPONENT

  • HYDRAULIC TRAINER KIT.

  1. HYDRAULIC POWER PACK

  2. PRESSURE RELIEVE VALVE

  3. DRIPT TRAY STEEL

  4. PRESSURE GAUGE

  5. FOUR-WAY DISTRIBUTOR

  6. DOUBLE ACTING HYDRAULIC CYLINDER  

  7. MOUNTING KIT FOR WEIGHT 

  8. SUITABLE WEIGHT

  9. 3/2 WAY DIRECTIONAL CONTROL VALVE

  10. 4/2 WAY DIRECTIONAL CONTROL VALVE

  11. 4/3 WAY DIRECTIONAL CONTROL VALVE

  12. NON RETURN VALVE

  13. PILOT OPERATED CHECK VALVE

  14. ONE WAY FLOW CONTROL VALVE

  15. T CONNECTOR WITH SELF SEALING COUPLING NIPPLES

  16. PROFILE PLATE

  • HYDRAULIC WORKSTATION WITH 40 SQ. MM ALUMINIUM PROFILE LEGS

  • CUT-SECTION MODEL FOR HYDRAULIC COMPONENTS

ITI Electrician Tools

ITI Electrician Tools

List of Tools

  • Steel tape, 15m length

  • Plier insulated 150 mm

  • Screwdriver 150 mm diamond head

  • Screwdriver 150 mm  insulated

  • Electrician connector, screwdriver 100 mm insulated handle thin stem

  • Heavy-duty screwdriver 200 mm 

  • Electrician screwdriver 250 mm thin stem insulated handle

  • Punch center 150 mm X 9 mm

  • Knife double-bladed electrician

  • Neon tester

  • Rule steel 300 mm

  • Hammer, cross peen 115 grams with handle 

B. Shop tools and equipment

  • Hammer ball-peen 0.75 Kg. with handle 

  • Pincer 150 mm

  • C-Clamps 200 mm & 100 mm

  • Spanner 150 mm adjustable 15 degree

  • Blow lamp 0.5 liter

  • Chisel 25 mm & 6 mm

  • Chisel cold firmer 25 mm X 200 mm

  • Allen key

  • Grease gun

  • Bradawl

  • Pulley puller

  • Bearing puller

  • pipe vice

  • Scissors blade 150 mm

  • Scissors blade 200 mm

  • Crimping tool

  • Wire stripper 20 cm

  • Mallet hardwood 0.50 Kg.

  • Hammer Exeter type 0.40 Kg.

  • Hacksaw 

  • Square try 150 mm blade

  • OUTSIDE CALLIPER 150MM SPRING

  • INSIDE 150MM CALLIPER SPRING

  • Divider 150 mm, Outside & Inside caliper

  • Plier LONG nose 100 mm

  • Plier flat nose 100 mm

  • Plier gas round nose 100 mm

  • Tweezers 100 mm

  • Snip straight &bent 150 mm

  • Spanner D.E. metric standard set

  • Drill hand brace 0 to 100 mm

  • Drill S.S. Twist block 2 mm, 5 mm, 6 mm set of 3

  • Plane,  cutters, 50 mm

  • smoothing cutters, 50 mm

  • Gauge, wire imperial 

  • File flat 200 mm 2nd cut

  • File half round 200 mm 2nd cut

  • File round 200 mm 2nd cut

  • File flat 150 rough

  • File flat 250 mm Bastard

  • File flat 250 mm smooth

  • Rasp, half-round 200 Bastard

  • Copper bit soldering iron 0.25 Kg.

  • Desoldering gun

  • Vice hand 50 mm jaw

  • Vice table jaw 100 mm

  • Oil can 0.12 liter

  • Contactor 3-f, 440V, 16 amps. 2 NO & 2 NC auxiliary contacts

  • Contactor 3-f, 440V, 32 amps. 32 amps. 2 NO & 2 NC auxiliary contacts

  • Limit switch

  • Rotary switch 16 A

  • Cut out, Reverse current, Overload voltage, Under voltage relays

  • pin type shackle type &suspension type insulators(raw material)

  • Hydrometer

  • Drill machine hand 0 to 6 mm capacity

  • Electric drill machine 12 mm capacity

  • Load band 5 kW (Lamp/Heater type)

  • Brake test arrangement with two spring balance of 0 to 25 Kg. rating

  • Laboratory type induction coil 6 Volts to 800 – 10000 Volts

  • Outside micrometer 0 to 25 mm

  • Thermometer 0 to 100 Deg. Centigrade DIGITAL

  • SERIES LAMP TEST

  • Knife Switch DPDT fitted with fuse terminals 16 Amps

  • Knife Switch TPDT fitted with fuse terminals 16 Amps

  • M.C.B. (Miniature Circuit Breaker) 16 amps

  • EARTH PLATE 60X60X3.15MM COPPER

  • EARTH ELECTRODE 2100X28X3.25MM

  • MCCB 100AMP

  • ELCB & RCCB 25AMP 

  • FUSE (HRC, GLASS, REWIRE TYPE)

  • Rheostat 0-1 W, 5 Amps, 0-10 W, 5 Amps, 0-25 W, 1 Amp, 0-300 W, 1 Amp

  • CAPACITOR   (ELECTROLYTIC, CERAMIC, POLYESTER FILM, VARIABLE, DUAL RUN)

  • VARIOUS ELECTRONIC COMPONENTS  :- RESITORS,DIODE,TRASISTOR,UJT,FET,SCR,DIAC,TRAIC,IGBT,SMALL TRANSFORMER ETC.

  • VARIOUS LAMP:- HALOGEN, FLUORESCENT TUBE, HP MERCURY, HIGH-PRESSURE SODIUM LAMP, LOW-PRESSURE SODIUM LAMP, LED.

  • PLUG SOCKET, PIANO SWITCH, LAMP HOLDER 230V 5A

  • CABLES TWISTED PAIR, NON-METALLIC SHEATHED CABLE, UNDERGROUND FEEDER, RIBBON, METALLIC SHEATHED, MULTI CONDUCTOR, COAXIAL, DIRECT-BURIED CABLE

  • BUS BAR WITH BRACKETS

  • RUBBER MAT

  • ELECTRICIAN HELMET

  • RCC POLE WITH ACCESSORIES

  • SAFETY BELT​

LIST OF EQUIPMENT 

  • OHM METER SERIES AND SHUNT TYPE 

  • Digital Multimeter (3 ½ digits)

  • A.C. Ammeter M.I. 0-5A

  • Milli Voltmeter center zero 100-0-100 m Volt

  • Ammeter MC 0-5A-0-25A-0-500mA

  • A.C. Ammeter M.I.0-1A,0-5A ,0-25A

  • K.W. Meter 0-1-3 kW

  • ​Digital watt meter 1kw 230v

  • A.C. Energy Meter (Single Phase 10 amps, 230 Volts)

  • A.C. Energy Meter (three Phase 15 amps, 440 Volts)

  • Single Phase power factor meter

  • Frequency Meter

  • Flux meter

  • LUX METRE

  • Tachometer with stopwatch ANALOG

  • Tachometer with stopwatch DIGITAL

  • Tong Tester/Clamp Meter 0-100 Amps A.C

  • Megger 500 Volts

  • 3 – point DC Starters

  • 4 – point DC Starters

  • Wheatstone bridge complete with galvanometer and battery 

  • Variable Auto Transformer 0-250 Volts, 8 Amps

  • PHASE SEQUENCE INDICATOR 3 PHASE 415V

  • Growler

  • Starters for 3 - f, 400V, 50 Cycles, 2 to 5 H.P. AC motors

  1. Direct Online starter  (BENTEX MAKE)

  2. Star Delta Starter with Manual,  

  3. Star Delta Starter with semi-Auto 

  4. Star Delta Starter with FULLY Automatic BENDIX 

  5. Autotransformer type Starter

  6. Resistance types starter

  7. Autotransformer type Starter

  8. Resistance types starter

  • Oscilloscope – Dual trace, 20MHz

  • Function Generator

  • SOLDERING IRON  25,65,120WATT 

  • TEMPERATURE CONTROLLED SOLDERING 50WATT

  • Discrete component trainer

  • Linear I.C. Trainer

  • Digital I.C. Trainer

DOMESTIC APPLIANCES

  1. ELECTRIC INDUCTION HOT PLATE

  2. ELECTRIC KETTLE

  3. ELECTRIC IRON

  4. IMMERSION HEATER

  5. A.C FAN CEILING

  6. GEYSER

  7. MIXTURE & GRINDER

  8. WASHING MACHINE

  9. MOTOR PUMP SET 

  10. Oil Testing Kit

  • INVERTER WITH BATTERY 1 KVA 12V BATTERY 

  • VOLTAGE STABILIZER 

  • DC POWER SUPPLY  0-30V 

  • Battery Charger with Variable output 1 kW

  • CURRENT TRANSFORMER 415V 50HZ 25/5A 

  • POTENTIAL TRANSFORMER 415V 50Hz 440/110V 

  • SOLAR PANEL WITH BATTERY 18 WATT

  • PENTIUM IV COMPUTER OR LATEST 

  • INKJET / LASER PRINTER

C. SHOP MACHINERY FOR 4 (2+2) UNIT NO ADDITIONAL ITEMS ARE REQUIRED 

  • D.C SHUNT GENERATOR 2.5KW 220V  DIRECTLY COUPLED WITH 3 PHASE INDUCTION MOTOR 5 HP 440 V WITH PANEL

  • MOTOR GENERATOR SET AC to DC 7.5 HP INDUCTION MOTOR THREE PAHSE 440V  DIRECTLY COUPLED WITH DC GENERATOR 5 KW 440V WITH PANEL

  • DC COMPOUND GENERATOR 2.5KW 220V WITH COUPLED 5 HP INDUCTION MOTOR WITH PANEL

  • DC SERIES MOTOR 2.5KW 220V COUPLED WITH SPRING BALANCE LOAD WITH PANEL

  • DC SHUNT MOTOR 2.5 KW 220V

  • DC COMPOUND MOTOR 2.5 220 V

  • MOTOR GENERATOR SET DC to AC SHUNT MOTOR 5 HP 440V AC GENERATOR 3 PHASE 4 WIRE 3.5KW 440/230

  • AC SQUIRREL CAGE MOTOR WITH STAR-DELTA PANEL

  • AC PHASE SLIPRING MOTOR 5 HP 440V WITH STARTER

  • UNIVERSAL MOTOR WITH STATER 1HP 240V

  • SYNCHRONOUS MOTOR WITH ACCESSORISE 3PHASE 3HP 440V WITH PANEL

  • THYRISTOR /IGBT CONTROLLED DC MOTOR DRIVE WITH TECHO GENERATOR FEEDBACK ARRANGEMENT

  • THYRISTOR /IGBT CONTROLLED AC MOTOR DRIVE WITH VVVF CONTROL 3PHASE 2 HP 

  • SINGLE PHASE TRANSFORMER CORE TYPE AIR COOLED 1KVA 240/415V 50Hz

  • THREE PHASE TRANSFORMER SHELL TYPE OIL COOLED WITH STAR-DELTA 3KVA 415/240V

  • ELECTRICAL MACHINE TRAINER:-SUITABLE FOR DEMONSTRATION THE CONSTRUCTION AND FUNCTIONING OF DIFFERENT TYPES OF DC MACHINE AND AC MACHINES(SINGLE PHASE AND THREE PHASE )SHOULD BE FITTED WITH FRICTION BRAKE ARRANGEMENT DYNAMOMETER, INSTRUMENT PANEL, AND POWER SUPPLY UNIT.

  • DIESEL GENERATOR SET 7.5 KVA 415 VOLT WITH CHANGE OVER SWITCH OVER CURRENT BREAKER AND WATER /AIR COOLED WITH ARMATURE STAR DELTA CONNECTION 

  • USED GENERATOR DC SERIES SHUNT COMPOUND TYPE FOR OVERHAULING PRACTICE

  • PILLAR ELECTRIC DRILL MACHINE MOTORIZED 12 -20MM CAPACITY 1 HP MOTOR 220V 

  • Motorized BENCH GRINDER 1 HP SINGLE PHASE DOUBLE SIDE WITH SMOOTH AND ROUGH WHEEL 

  • AC SERIES TYPE MOTOR 1 HP 240 V

  • SINGLE PHASE MOTOR CAPACITOR WITH STARTER SWITCH

  • MANUAL MOTOR COIL WINDING MACHINE WITH STEP ARBORE

  • CEILING FAN COIL WINDING MACHINE 220V SINGLE PHASE  WITH SPEED CONTROL

  • PRIMARY CURRENT INJECTION SET 220 50Hz SINGLE-PHASE 200A OUTPUT

  • STEPPER MOTOR WITH DIGITEL CONTROLLER 

  • SHADED POLE MOTOR 240V 50Hz

  • D.SHOP FLOOR FURNITURE AND MATERIALS - 2(1+1)

ADDITIONAL ITEMS 

  • FIRE EXTINGUISHER ABC  2 KG

  • FIRE BUCKET 

ITI Plumber Tools

ITI Plumber Tools

List of Tools

A: TRAINEES TOOL KIT

  • ​Rule Steel 300 mm both in inch and mm

  • Rule Wooden 4 fold, 600 mm

  • Hacksaw Frame adjustable for 250 to 300 mm

  • Scriber 200 mm 21 Nos. 5. Centre punch 100 mm

  • Chisel Cold, flat 20 mm

  • Hammer ball pein 800 grams

  • Hammer ball pein 50 grams

  • File flat rough 300 mm

  • Level spirit wooden 300 mm

  • Plumb bob 50 grams

  • Trowel C-125-I S: 6013

  • Stillson wrench 200 & 350 mm

  • Screw Driver 250 mm

  • Wooden Mallet small I S: 2022

  • Cutting pliers 200mm I S: 3650

  • Steel tape (5m)

B: TOOLS INSTRUMENTS AND GENERAL SHOP OUTFITS

  • Marking Table 900X600X900mm high

  • ‘V’ Blocks with-63AIS2949clamps 80/7

  • Combination set 200 mm

  • Scribing Block, Universal, 300 mm

  • Hand Vice, Jaw 50 mm

  • File Flat, Smooth 200 mm

  • File Half Round, Rough 300 mm

  • File, Square, rough 250 mm

  • File, Square, Smooth 200 mm

  • File Triangular Rough 250 mm

  • File Flat Rasp 250 mm

  • File Triangular Smooth 200 mm

  • Chisel Cold Flat 20 mmX300mm

  • Chisel Cross Cut 6X150 mm I S-402

  • Chisel Round Nose 3X150 mm I S -402

  • Chisel Diamond Point 6X150mm

  • Tap and Die set to cut B.S.F., B.S.W. 1 set each 18. metric threads of sizes M-6 to M-12

  • Screw Pitch gauge to cover above threads

  • Punch, Letter

  • Punch, Number

  • Saw Plumber 300mm

  • panner monkey up to 50mm

  • Stove melting solder

  • Cutter, Pipe, wheel type 6mm to 25mm

  • Oil stone 150X50X25mm

  • Soldering Iron, Copper, Bit, Fire heated, Hatched, Straight, 500 grams

  • ​Snip Straight 250mm

  • Snip bend 250mm

  • Try square 200mm

  • Inside Caliper 150mm

  • Caliper outside 150mm

  • Odd leg caliper 200mm

  • Tenon saw

  • Hand Saw.

  • Mortise Chisel

  • Firmer Chisel

  • Mallet Medium IS 2922

  • Jack plane

  • Gas Welding set with oxygen-acetylene cylinder

  • Goggles pair welder 100 mm

  • Brush Steel Wire 150X 50 mm

  • Table welding 1200X 750 mm with fire bricks top and stand

  • Pliers combination, 200 mm

  • Blow lamp 500 milliliters

  • Washer cutter

  • Mirror 100X150 mm

  • Scribing gauge

  • Soil pot with brush

  • Pot- Hook

  • D. E. Spanners 7X8, 10X11, 13X1. 7, 19X2.2, 24X27 IS:2028 2 sets. 52. Branch Gimlets

  • Bending Spring

  • Plumbers Ladle

  • Tool caulking set of 5

  • Plumbers’ metal melting pot 10 kg

  • Pipe stock and dies complete with stocks, bushing, bushing holders, Taps and wrenches sizes covered, to suit pipes of bore dia 6,8,10,20,25,32,40,&50mm

  • Pipe vice to grip up to 77 mm is -2587

  • Stillson pattern pipe wrenches 450 mm to take pipe up to 52 mm dia I s -4003

  • Stillson pattern pipe wrenches 300mm to take pipe 20 mm to 32mm

  • Chain: pipe wrench 90mm -650 is 4123

  • Adjustable, spanner, A-375, IS- 6149 2 nos. 63. Anvil 50 or 63 kg. IS- 510

  • Pipe bender manually operated

  • Leg vice, 75mm jaw on Stand IS -2588

  • Hand drill 6mm capacity with drill chuck (Electric)

  • Drill Twist (straight shank ) 3mm to 6mm

  • Portable forge, 450mmwith hand blower

  • Flat smithy tong

  • Working bench 2400x1200x750mm with 4 voice 125 mm jaws

  • Bathtub small size

  • Wash Basin (16” X14” X10”)Equivalent

  • Water Heater 10 liter

  • Water closet (European type p) complete with overhead cistern

  • Water closet (Indian type ) complete with overhead cistern

  • Urinal wall type complete with automatic system

  • Water meter

  • Fire Extinguisher

  • Fire Buckets withstand

  • Sight rail and boning rod

  • Ratchet pipe dies 15 mm to 32 mm

  • Double face hammers

  • Dormant, Pickaxe, Spade, Girmale

  • The solar water heater system

  • Ring gauge 15 mm,20mm,25mm,32mm

  • C: GENERAL MACHINERY INSTALLATIONS

  • Hammering drilling machine

  • Electric PPR pipe welding machine

  • Electric pump, 1 HP

  • D.E. pedestal grinder with two wheels 175mm rough and smooth

  • Hydraulic pressure machine for testing leakage in GI pipe fittings etc.

  • Bench drilling machine with chuck and key up to 15mm capacity

  • Pipe bender(Hydraulic type)

bottom of page