At Dhanbad Lab Instruments India Pvt Ltd you will locate an expert research center hardware and quality gas detector for regular use inside an organization. The gas detector meets the prerequisites for individual security and is fundamentally used to recognize methane, hydrogen sulfide, carbon monoxide, and oxygen levels (alongside 50 other potential gases). The auto-alignment work considers a simple re-establishment of the gas identifier. Contingent upon the model, the gas locator can store information and later exchange the recorded qualities to a PC.
A gas detector is a gadget that recognizes the nearness of gases in a zone, regularly as a feature of a security framework. These kinds of gadgets are utilized to identify gas spills or different outflows and can interface with a control framework so a procedure can be halted automatically. A gas locator can sound an alert for administrators in the region where the break is happening, allowing them the chance to leave. This sort of gadget is significant in light of the fact that there are numerous gases that can be destructive to natural life, for example, people or creatures.
Gas detectors can be utilized to identify burnable, combustible and dangerous gases and oxygen exhaustion. Such gear is broadly used in industry and can be found in areas, for example, on oil slicks, to screen fabricating forms and rising advancements, for example, photovoltaic. They can be used in putting out fires.
Gas leak location is the way toward recognizing possibly unsafe gas spills by sensors. Also a visual ID should be possible using a warm camera these sensors usually utilize a discernible caution to alarm individuals when a perilous gas has won recognized. Presentation to lethal gases can withal happen in tasks, for example, painting, fumigation, fuel filling, development, the unearthing of defiled soils, landfill activities, entering limited spaces, and so forth. Pervasive sensors incorporate ignitable gas sensors, photoionization identifiers, infrared point sensors, ultrasonic sensors, electrochemical gas sensors, and metal-oxide-semiconductor sensors (mos sensors). All the more as of late, infrared imaging sensors have come into utilization. These sensors are utilized for a wide scope of uses and can be found in mechanical plants, processing plants, pharmaceutical assembling, fumigation offices, paper mash factories, airplane, and shipbuilding offices, hazardous materials activities, squander water treatment offices, vehicles, indoor air quality testing, and homes.
Atomic Absorption Spectrophotometer | Digital Multimeter | Concrete Moisture Meter | Gloss Meter | Gas Detector | High-Speed Camera | Infrared Thermometer | Microscope | pH Meter | Particle Counter | Power Supply Unit | Paperless Recorder | Spectrophotometer | Torque Meter | Thermometer | Viscometer | Water Analysis Meter
Gas Detector PCE-GA 10The gas detector PCE-GA 10 is used to check for leaks in gas pipes and connections. This gas detector is suitable for many combustible gases. The gas detector has 5 LEDs that inform the gas intensity.
- Up to 15 gases
- For flammable gases
- 400 mm / 15.7 in sensor
- Visual, audible and haptic alarm
Gas Detector PCE-HFX 100The gas detector PCE-HFX 100 is specially designed for monitoring indoor ventilation. We all know how the importance of the indoor climate in the workplace, in schools, kindergartens etc. The performance of an individual depends on the air quality at the workplace.
- Formaldehyde HCHO: 0 ... 2 mg/m³
- Temperature: -10 ... 50°C / 14 ... 122°F
- Humidity: 0 ... 99% r.H.
Gas Detector PCE-GA 12The gas detector PCE-GA 12 is a very easy-to-use measuring device. This gas detector detects combustible gases and emits a vibrating alarm as well as an audible alarm once a combustible gas has been detected by the gas detector.
- Measuring range up to 10000 ppm
- Audible alarm with 85 dB
- Rechargeable battery for mobile use
- Automatic calibration
- For the detection of combustible gases
CFC / HFC Refrigerant Gas Detector PCE-LD 1PCE-LD 1 is a portable handheld gas detector used to locate CFC/HFC refrigerant gas leaks. This highly sensitive gas leak detector can locate gas leaks from HVACR refrigeration systems even in areas contaminated by other gases. The gas sensor is located at the end of a 390 mm / 15.35 in flexible goose-neck tube, allowing unique access to hard-to-reach places.
- Adjustable high/low sensitivity:
6 g/yr or 30 g/yr for R-22 and R-134a
8 g/yr or 40 g/yr for R404A, R-407C and R-410A
VOC Gas Detector PCE-VOC 1PCE-VOC 1 is a portable handheld volatile organic compound (VOC) and formaldehyde (HCHO) meter or gas leak detector for indoor air quality (IAQ) monitoring applications. This easy-to-use VOC meter is ideal for measuring total volatile organic compound (TVOC) and formaldehyde (HCHO) levels in homes, offices, factories, laboratories, hotels, schools and other indoor environments.
- TVOC range: 0.00... 9.99 ppm
- HCHO range: 0.00... 5.00 ppm
- Displays units in ppm or mg/m³
- Audible and visual a
Toxic Gas Detector / gas detector PCE-FGD series toxic gases & oxygenThe PCE-FGD series Toxic Gas Detectors are used to protect against poisoning by toxic gases. The oxygen content of the air can also be monitored for a wide variety of applications. The robust ABS housing of the Toxic Gas Detectors with IP65 degree of protection allows operation even in the harshest environments.
- Sensors for many toxic gases and oxygen available
- robust ABS housing with IP65 degree of protection
- standard signal output 4… 20 mA / 2… 10 V
- durable sensors selectable
Gas Detector PCE-WMM 50PCE-WMM 50 is a wall-mounted gas detector that uses diffusion to monitor carbon dioxide (CO2) gas levels and ambient temperature (ºC / ºF) indoors. This indoor air quality meter features an alarm-activated potential-free contact that can, for example, activate a fan to reduce CO2 gas concentration in the room.
- CO2 gas measurement range: 0 ... 50,000 ppm
- Temperature measurement range: 0 ... +45 ºC / +32 ... +113 ºF
- IP54-rated enclosure on sensor and remote display units
- 2 adjustable ala
Gas Detector PCE-WMM 100The gas detector PCE-WMM 100 consists of a main unit and a remote display. The CO2 gas detector PCE-WMM 100 is used to measure carbon dioxide and oxygen in a fixed location. The gas detector PCE-WMM 100 has two relays that can be used to control alarm lights or sounders.
- Measuring range CO2: 0 .... 50000 ppm
- Measuring range O2: 0 ... 30 %
- Measuring range temperature: 0 ... 50 °C / 32 ... 122 °F
- Main and remote unit
- Alarm relay
- 4 ... 20 mA analog outputs
- Acoustic alarm
Gas Detector PCE-AQD 10The gas detector PCE-AQD 10 is used to measure air quality. The gas detector PCE-AQD measures 10 carbon dioxide, temperature and humidity. The CO2 sensor from the gas detector is disconnected from the main unit with a connection cable.
- Measuring range: 0 ... 4000 ppm
- Measuring range: 10 ... 90% rh
- Measuring range: 0 ... 50°C / 32 ... 122°F
- Memory on SD card
- 3 parameters of air quality
- CO2, air temperature and humidity