COVID19 Essential

Coronavirus Disease 2019 (COVID -19) is an acute respiratory disease caused by a novel Coronavirus (SARS-CoV-2), transmitted in most instances through respiratory droplets, direct contact with cases, and also through contaminated surfaces/objects. Though the virus survives on environmental surfaces for a varied period of time, it gets easily inactivated by chemical disinfectants. In view of the above, the following guidelines are to be followed, especially in areas reporting COVID-19. For ease of implementation, the guideline divided these areas into (i) indoor areas, (ii) outdoor areas, and (iii) public toilets.

1. Indoor areas including office spaces, including conference rooms should be cleaned every evening after office hours or early in the morning before the rooms are occupied. If the contact surface is visibly dirty, it should be cleaned with soap and water prior to disinfection. Prior to cleaning, the worker should wear disposable rubber boots, gloves (heavy duty), and a triple-layer mask.

2. Outdoor areas have less risk than indoor areas due to air currents and exposure to sunlight. These include bus stops, railway platforms, parks, roads, etc. Cleaning and disinfection efforts should be targeted to frequently touched/contaminated surfaces as already detailed above.

3. Public toilets Sanitary workers must use a separate set of cleaning equipment for toilets (mops, nylon scrubber) and a separate set for sink and commode). They should always wear disposable protective gloves while cleaning a toilet.

Sodium Hypochlorite | Surgical Mask | Infrared Thermometer | Personal Protection Equipment (PPE) Kit | Hand Gloves | Silfectant

 

Sodium Hypochlorite

​WHY SODIUM HYPOCHLORITE FOR DISINFECTION and SANITATION?

Sodium Hypochlorite Is Among The Widely Consumed Disinfect Due To The Following

  • Reasons: Wide antimicrobial range: it is utilized to dispose of natural issues present in the water.

  • The natural issue, for example, a microorganism, green growth, and so on.

  • Moment activity against microbes: it goes about as an executing specialist for microscopic organisms persevering in water.

  • Diminished to chloride particles causing oxidation: after blending in with water, sodium hypochlorite separates and creates free chlorine particles.

  • In this manner, the chlorination of water happens. It's Reasonable steadiness in treated consumable water.

  • It's the usability and solvency in water. Being a Cheap disinfectant when contrasted with generally disinfectant.

  • The arrangement is non-combustible when presented to air.

​PACKING : 40 kgs, 50 kgs, 60 kgs, 270 kgs, 1200 kgs, Tanker Loads

 
Image by CDC

Silfectant-11       Silver Activated Disinfactant

Silfectant-11 | Silver Activated Disinfactant

SILFECTANT-11 is a unique solution of stabilizing the unstable Hydrogen Peroxide (H2O2) with Antimicrobial Silver as a ‘stabilizer and activator’ at the same time. The silver in hydrogen peroxide acts on the DNA, while the H2O2 is corrosive on the cell walls, making this hydrogen peroxide with silver work on a dual-phase. The formulation makes it a highly potent disinfectant. Silver hydrogen peroxide or silver peroxide holds a more superior position in the range of disinfectants because of its superb antiviral, antifungal, and antibacterial abilities. After the reaction, it decomposes into water (H2O) and oxygen (O2), making it highly eco-friendly. This synergy of hydrogen peroxide and nanosilver is so effective that it makes SILFECTANT – 11 a biocide nearly twenty times more powerful than hydrogen peroxide alone.

SILFECTANT-11 used in various applications for air and surface disinfection through fogging, spraying, surface wiping, etc.

Composition:

  • Silver Nitrate ----------- 0.01% w/v

  • Hydrogen Peroxide ---- 11% w/v

Effective Against :

  • Bactericide

  • Mycobactericide

  • Fungicide

  • Virucide

  • Sporocide

Shelf life: 2 Years

Available Packing: SILFECTANT-11 is available in HDPE jars of 1 L and 5L.

 
 

Surgical Face Mask

  • 3 Ply Face Mask

 

Infrared Body Thermometer LX100

IBT Infrared Body Thermometer LX100IBT is a non-contact digital thermometer, to show the body temperature of the subject by measuring its thermal radiation. Built-in Class II laser identifies the center point of the area being measured. Backlighting illuminates display for taking measurement at night or in areas with low background light levels. Quick response time with one-button operation makes it reliable for accurate measurements.

  • IR Temp. Range: 0℃~60℃(32℉~140.6℉)

  • Basic Accuracy (IR): ±2% or reading ±2 ℃/3.6℉ (Which is greater)

  • Measuring Distance: 5 cm

  • Diode Laser: Auto-off

 

Personal Protection Equipment (PPE Kit)

  • Non-Wooven Full Safety Suit

  • N95 Face Mask

  • Shoe Cover

  • Head Cap

  • Safety Goggles 

  • Gloves

  • Transparent Face Cover 

  • As per ICMR Guidelines

  • 80 GSM or better

 

Hand Gloves

  • Surgical 

  • Rubber

  • Plastic

Get Monthly Updates